In order to give full play to the vehicle performance in the future operation of compressed garbage trucks, we share some videos on vehicle operation and product maintenance instructions, so that users can quickly and comprehensively master the vehicle operation and maintenance skills.
“Seven points by quality, three points by maintenance”, good equipment management and maintenance is the key to reduce the failure rate of equipment. Only regular maintenance of the vehicle (top and chassis) can ensure that it is always in good running condition, please be sure to strictly follow the vehicle maintenance procedures.
Note 1.
Important note: All hinged parts must be fully buttered weekly
Note 2.
After unloading the garbage, it is necessary to clean the filler seal, sink and sewage tank garbage
Function: Avoid the effect of garbage adhesion on sealing performance. Function: Avoid shaft and sleeve stuck, slow down shaft and sleeve wear
Note 3.
From time to time, the residual garbage on the slide, the back of the shovel, the piston rod of each cylinder and the cylinder head will be cleaned up
Note 4.
Periodically check whether the oil pipe joint is loose, whether the oil pipe skin is scratched and worn, and whether the nut of the horse bolt fixing the garbage box is loose
Function: Reduce oil leakage and avoid body displacement. Function: Avoid the difficulty of shovel operation due to garbage stuck, small garbage into the cylinder and damage the cylinder seal.
Note 5.
If there is water in the oil-water separator, drain it in time
Function: Avoid water and oil entering the gas path to affect the use.
Note 6.
The skateboard slider should be replaced in time when it is worn more than 10mm
Function: Avoid the effect of rocking the slider due to wear and tear.
Note 7.
Important reminder: the new car must replace the hydraulic oil after three months, and replace it every six months in the later period. Pay attention to cleaning the oil filter element and the oil filter element of the oil tank when replacing it
Function: Reduce the attenuation and damage of hydraulic component performance caused by impurities generated after a period of oil use.
