The purpose of the vacuum pump of a septic tank truck is to drain all the air in the septic tank tank of the septic tank truck, make the tank tank in a vacuum state, and then pump the external dirt into the tank through the pipe, and also discharge the sewage in the tank by pressurizing the tank body. The pump is the core part of the septic tank truck in operation. As the use time increases, such machines will also encounter failures. So, how do we troubleshoot the vacuum pump of a septic tank truck during daily use?
The first step is to check whether the valve of the vacuum pump of the septic tank truck is open. If we do not open the water outlet during use, it may cause garbage to be blocked in the machine, causing the machine to malfunction.
The second step is to check whether there are foreign objects blocking the water suction pipe port and the filter screen of the septic tank truck. If the water suction pipe port is blocked by foreign objects, it may cause the machine to fail to operate normally, and finally cause internal failures.
The third step is to check whether the septic tank truck has air leakage. Because the normal operation of such machines is mainly based on the vacuum state formed by their air pressure. Once the machine leaks, the machine will not be able to operate normally. The correct way is to find out the damaged position and repair it in time.
The fourth step is to address the speed of the septic tank suction truck. In order to suck up items, the speed of the machine must meet certain requirements, otherwise it will affect its vacuum degree, which may cause failures. Under normal circumstances, the vacuum pump of a normal septic tank suction truck has a speed of 1500 revolutions per minute.
In the process of troubleshooting, we must avoid the machine idling the vacuum pump for a long time, which will cause its temperature to be too high, which may burn the vane of the vacuum pump and eventually affect its life.
The vacuum pump of the septic tank suction truck is the main engine for the operation of the machine, so its quality and fault problems are the main areas that need to be solved. While ensuring quality, we also need to regularly troubleshoot its faults, which can not only ensure the operation of the machine, but also protect the life of the machine.
