1. In order to ensure the cleanliness of the tank car, the tank and the oil transmission system should be cleaned regularly, and the internal and external joints of the oil hose should be frequently coated with lubricating oil, so that the tank car can be easily disassembled and assembled. After each completion of the oil pipe, clean it in time to ensure that the pipe is clean!
2, the use and maintenance of oil pump, strictly in accordance with its use and maintenance instructions!
3, before the refueling operation, it is necessary to use the electric pole to insert into the wet land, the oil tanker tape should be grounded, and the static electricity should always be kept good during the operation!
4, tanker safety valve, filter network should be frequently checked and cleaned!
5, the oil tank and pipeline system should be cleaned regularly. The tanker regularly checks whether the connections of the pipeline system are well connected and the seal is reliable!
6: The tank car should be installed in accordance with the specifications of electrostatic belt, when electrostatic encounter the remaining high concentration of combustible gas in the car, the explosion occurred, electrostatic belt for the car body and other frequent friction, easy to produce static electricity space can effectively out of electrostatic hazards, to ensure that the body is not harmed.
Installation method:
Install on the metal parts of the chassis! After a period of time, the bottom part of the wear, you can put the upper rubber belt down some!
If conditions exist, users can install electrostatic grounding alarm for tank cars
Seven. The tanker shall be equipped with a special fire extinguisher, and shall be equipped with a mopping chain and an electric pole. When driving, the mopping chain should contact the ground; When refueling or discharging oil, the pole must be inserted into the wet ground.
8. The oil tank refueling hole should be tightly sealed, the oil valve, the oil pipe should be no leakage, the oil tank vent should be unimpeded, the oil pump oil filter screen should be cleaned regularly, the oil hose should be immediately installed after the end of the joint cover, there should be no dirt into.
9. The gasifier and exhaust pipe of the internal combustion engine shall not be tempered. The exhaust pipe should be installed in front of the vehicle.
10. Tanker workers must not wear shoes with iron nails. Smoking is strictly prohibited in the vicinity of oil tanks, and fire is strictly prohibited.
11. When parking, should be away from the fire, hot season should choose a cool place to park. Do not park under trees or high power lines during thunderstorms. When parking in the middle of driving, there should be special care.
twelve During the maintenance process, if the operator needs to enter the oil tank, it is strictly prohibited to carry the flame, and there must be reliable safety protection measures, and there must be special supervision outside the tank.
13. All electrical devices on the car must be well insulated and no sparks are allowed. The working lighting for vehicles should be safety lights below 36V.
fourteen When the tank settling tank is frozen, it is strictly prohibited to bake with fire, and it can be melted with hot water or steam, or the car can be thawed in the conservatory.
Fifteen. When maintaining and repairing under the car, the internal combustion engine should be turned off, the hand brake should be tightened and the wheel should be tightened.
16. When the vehicle needs to be tested after repair, it shall be driven by qualified personnel, and the vehicle shall not be manned or loaded. When it needs to be tested on the road, the test license issued by the traffic management department shall be hung.
17. When parking on the ramp, the downhill park should be put in reverse gear, the uphill park should be put in first gear, and the tire should be plugged with a triangle wedge.
