Search
Close this search box.

Sprinkler Parts Analysis

When it comes to sprinklers, it is a common sanitation vehicle, so what are the sprinkler accessories? Sprinkler parts manufacturers give you an analysis!

The sprinkler uses the engine power to drive the on-board sprinkler pump through the power extractor, adding water from the water inlet to the car, or transferring the water in the tank to various nozzles through the pipeline, so as to achieve various functions

The essential accessory of the sprinkler is the force extractor, which matches the gear of the gearbox and its function is to borrow the power of the gearbox. The switch is controlled by the flexible shaft cable, the other end of the flexible shaft cable is installed on the left side of the main driver’s seat, the switch is more convenient, electric control.

Between the power extractor and the water pump is a connected drive shaft, which is a shaft that can transmit power in the drive shaft of the universal transmission device. It is a high-speed, low-support rotating body, so its dynamic balance is very important.

The pipe will be connected to various sprinkler functions of the sprinkler. The screen tee is installed behind the pump. The main function is to filter the impurities in the water so as not to damage the pump

A four-position three-way ball valve of a pipe is installed with a through ball valve, which is mainly used for water absorption. It is therefore fitted with flanges. There are rubber pads in the middle of the ball valve and flange to prevent water leakage. This flange is used to connect the clear suction pipe. When the suction tube is not in use, it is locked in the barrel. The barrel is mounted on both sides of the tank and secured with pipe clamps.

The other pipe of the four three-way ball valves is connected to the sprinkler tank. The top of the tank is equipped with a water wheel filling port, also known as manhole cover, which is used for filling and tank maintenance; Both sides of the mouth of the tank are safety handrails, and the end of the tank is made of safety ladder, which is convenient for the staff to go up and down. At the front end of the tank, there is an embroidered light measuring tube, which can check the water level in the tank at any time. You can also install a low water level alarm so you can know how many locations are at work.

Water ball valve is a flow valve, simply put, is to discharge water; Fire hydrants are used to put out fires, to connect fire water bags.

Front wash is used to wash the road surface, you can also choose to install three bay before washing. Sanwan before the washing quality is better, the pressure is greater, can be washed about 28 meters. If the front position is not high enough, it can also be installed at the waist of the vehicle. This forward position can also choose to install the universal duck beak, that is, the universal ball valve is equipped with Guang-style duck beak, so that the road is washed more water.

Side spray can pour the green belt on both sides of the highway or dust, generally installed duck beak, but also users choose to shower, can spray about 5 meters.

After the installation of sprinkling weight, for dust removal, road sprinkling, can be sprayed about 5 meters, generally made of alloy carbon steel, aluminum alloy, stainless steel and other materials.

The sprinkler is used to water tall trees. The pillar can be sprayed 35 meters away, and the fog can be sprayed about 5 meters. This can be used to water high points and distant trees. Sometimes electronic sprinklers are mounted on the front. If it is a material, you can choose aluminum alloy, stainless steel, etc.

The sprinkler is used to water tall trees. The pillar can be sprayed 35 meters away, and the fog can be sprayed about 5 meters. This can be used to water high points and distant trees. Sometimes electronic sprinklers are mounted on the front. If it is a material, you can choose aluminum alloy, stainless steel, etc.

The general component is to install a stainless steel wide ball valve in front of each spray component to control each spray component. Some users choose to install aluminum ball valves, pneumatic ball valves or pneumatic push rods, which are converted to electrical control via solenoid valves so that these functions can be operated in the cab with one click.

Other components are warning lights, arrow lights, side lights and other lamps. If the dust removal area is large, you can also choose to install the dust suppression spray rod and fog gun unit. Do you know all the parts of a sprinkler?

Share:

More Posts

Send Us A Message

Please enable JavaScript in your browser to complete this form.
Scroll to Top